How to Make a Disposable Vape Work After It Dies?
Tired of throwing away your disposables? Even the devices you
bought from the best disposable vape
brands can malfunction. Don’t you need a possible solution to restore them
and use them to their full potential? You can revive a dead disposable vape in
most cases.
Disposables are designed to be disposed of after they run out of
battery or e-juice. Unless it is a rechargeable disposable vape that you
recharge, the manufacturer does not intend for the user to refill it. Doing so
can damage your vape and the overall experience.
So, how can you make a disposable vape work after it dies? The
solution will depend on whether it ran out of e-juice or the battery is dead.
Recharging a device not designed to be recharged can result in damage or fire.
Refilling it with e-juice has fewer risks but is not free from drawbacks.
Here’s what you should know.
Making a Disposable Vape Work After It Dies
Disposable vape brands create their devices as short-term use tech. They are available
pre-charged and pre-filled out of the box. They comprise these components:
●
E-juice reservoir
●
Battery
●
Heating element
When you draw on the vape, the puff activates the heater, which
vaporizes the e-juice. When one of these parts dies, you dump the device, but
what if you could refill it?
Refilling a Non-Refillable
Disposable Vape
These steps are not recommended, but if it is only what you want
to know, you will find your guide here. You may need a tincture dropper or a
syringe to reload the reservoir with e-juice.
Step #1: Remove the mouthpiece
The mouthpiece is usually screwed into the e-juice chamber.
Gently turn the mouthpiece counterclockwise to unscrew it. Some brands seal it
to the chamber, to open which, you must carefully cut the seal with a knife.
Some non-cylindrical designs may require you to pry the mouthpiece away instead
of turning it.
Step #2: Measure the e-juice
Fill the dropper or syringe with about 2 ml of e-juice. Smaller
cartridges may need no more than 0.5-1 ml, whereas larger devices may require
more. Remember, you need not fill the vape to the brim. Only a few drops should
suffice.
Step #3: Pour e-juice into
the cartridge
If using a syringe, use a blunt-tip one. Place the top into the
small opening on top of the reservoir and slowly inject. Keep a clean cloth or
paper towel, just in case you spill some liquid.
Step #4: Reattach the mouthpiece
Once refilled, wait for about 10 minutes before reassembling the
device. Screw or press the mouthpiece to its original place. You should not be
able to resume vaping.
Conclusion
There you have it, the easiest way to continue using your vape
instead of looking for more disposable
vape brands and ending up with the same result.
Comments
Post a Comment